home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CD School House 10
/
CD School House - Education and Games (10.0) - Wayzata Technology (1995).iso
/
mac
/
DOS
/
MISC
/
KNWRS120
/
KWSREAD.ME
< prev
next >
Wrap
Text File
|
1992-12-02
|
3KB
|
62 lines
Welcome to KNITWARE (TM) Sweater Design.
This is Shareware release 1.20 December 1992.
from: Morningdew Consulting Services Ltd.
7604 Morningdew Rd., R.R. #5
Victoria, B.C. Canada
V8X 4M6 Phone: (604) 652-4097
This disk should contain the following files:
KWSREAD.ME This introduction
KWSINSTL.BAT Hard disk installation
KWS.EXE Program file
KWSUSER.DOC User manual
KWSORDER.DOC Registration and order form
KWS.HLP Help text
KWS.NDX Index to help text
KWS_SIZE.DAT Size and measurement data
KWS_NDL.DAT Needle sizes data
KWS_PATT.ORG, .DAT, .BKP Pattern data: original, user master, backup
KWS_DFLT.ORG, .DAT, .BKP Designer defaults data: original,
user master, user backup
To get started:
1. Floppy disk installation. Make a backup copy of this disk, to use
as your working disk. If you have two drives the same size, type:
DISKCOPY A: B: [Enter]
otherwise, type:
DISKCOPY A: A: [Enter]
If you have problems, see User Manual section 2.1.
2. Hard disk installation. Insert KNITWARE disk in floppy drive A, type:
A: [Enter] then KWSINSTL A C [Enter]
where C is your hard drive. Change A or C as required, if you are
using different drives. If you have problems, see User Manual 2.2.
3. Try out the program. For floppy disk installations, put your working
disk in drive A:, type:
A: [Enter] then KWS [Enter]
To run from hard disk, type:
CD \KNIT [Enter] then KWS [Enter]
4. Print the user manual (it is 42 pages long). Insert the disk in drive
A:, turn the printer on, and type
PRINT A:KWSUSER.DOC -or- TYPE A:KWSUSER.DOC PRN [Enter]
If the screen displays NAME OF LIST DEVICE (PRN): press [Enter] again.
If your printer prints at 8 lines per inch (the document paging is too
soon), stop the printer and type PRINT /T [Enter] to cancel the print
job. When the printing has stopped, turn on the printer, type
MODE LPT1:80,6 [Enter] to set to 6 lines per inch, and
PRINT A:KWSUSER.DOC [Enter] again.
5. READ THE MANUAL!!! There's lots of good stuff in there, and it will
help you to make full use of the program's many features.
Enjoy, and may the knitting be with you!